SAAS SG31006 Fuel Level Sender Muscle Series Fuel Level Sender

Description

SAAS Fuel Tank Sender Muscle SeriesSG31006 Fuel Level Sender – suits SAAS Muscle Series Fuel Level Gauges 10-180 Ohms.Universal Fuel Tank Level Sender that matches to our SG-FL52B and SG-FL52W Muscle Series fuel level gauges.Features:Adjustable for 5″ – 24″ deep tankFits 5-bolt mounting flangeMounting hole in tank 38mm diameterOD of mounting flange 70mmPCD ~ 51.5mm5mm (~3/16″) mounting boltsOhm scale: 10 Ohm empty / 180 Ohm fullRecommended sender for SAAS SG-FL52B and SG-FL52W Fuel Level GaugePlease note that float type may vary from imagesInstallation Troubleshooting:(NB – these tips relate to the SAAS SG31006 sender only)Do I need to ground my sender?Yes, the SG31006 must be earthed to a good common ground. Use an earth wire from the sender mount flange to chassisMy fuel level gauge is only reading FULLCheck that the sender has a proper ground or that there isn’t a break in the sender to fuel level gauge wireMy fuel level gauge is only reading EMPTYCheck that your sender to fuel level gauge isn’t grounding out somewhereIt’s also possible that the centre terminal on the sender is itself grounding out against the bodyWill the SG31006 work on a 6 volt system?Yes – the fuel gauge is reading resistance to ground regardless of the vehicle voltageHow do I test my fuel sender?A fuel sender can be bench tested with a multimeter. With the multimeter set to the setting put the red probe on the post that is the gauge lead and put the black probe on the ground post or on the body of the fuel sender. Record your readings with the fuel sender in the empty position and in the full position. Those two numbers will tell you the ohm range of your sender